How the Zergs were Made

Chapter 460 - 461 Anti-Matter Promotion (Part 2)

Chapter 460: Chapter 461 Anti-Matter Promotion (Part 2)

In the design concept of the original hydrogen mass spraying in the container was removed, and the notch in the container was retained, but the opening was made smaller. This design also led to the fact that when organisms move at high speed in the universe, although antimatter will still be forcibly squeezed out due to inertial pressure, there will be no one-time large flow. Loss is a slow release process.

But this is a deliberate design layout!

According to M, it is to use this slow release to gradually increase the speed of organisms in the universe. On the outside of the gap, M M is added three nozzles to spray hydrogen mass used for the annihilation of positive and negative substances.

"It's a very thoughtful design, but there is a problem."

[What's the problem?]

"The annihilation of positive and anti-matter requires the contact between positive and anti-matter. Such a design does not make the hydrogen mass and the anti-hydrogen mass fully contact 100%. In order to prevent the anti-hydrogen mass from being wasted, more hydrogen mass needs to be sprayed out, which invisibly increases the load."

Huo Gu explained the drawbacks of this design. In the design, there is no electric field in the area where antimatter and positive matter come into contact, so it is impossible to fully annihilate positive and antimatter as designed by the collectors.

"Isn't it enough to add the electric field?"

Some collectors proposed so, but it was quickly refuted, and it was ? who refuted it.

[This is not feasible. In this way, a structure that tends to be closed is needed. A large part of the energy that will lead to the annihilation of positive and negative materials will be intercepted by the closed material structure. It can only become the thermal energy carried by the material and cannot be used as thrust. I did not add the electric field design because of this. Consider.]

[Huo Gu, do you have any good methods?]

Huo Gu thought for a moment. It added a horn-shaped design structure at the end, and then a circle around the magnetic ring of the 'horn'. The released antihydrogen and hydrogen mass will be squeezed together under the action of the electric field to fully react, and the outward horn-shaped design can be as far as possible without blocking the annihilation of positive and negative substances. Post-gamma ray release.

"In this way, the basic framework of anti-material promotion will be completed. Next, we need to improve the details and adjust the current framework parameters appropriately according to the situation."

Huo Gu announced that he would enter the next stage, and Myan agreed and proposed matters that need to be solved first.

[Then solve the problem of gamma radiation first.]

"Yes, this problem is the focus to be solved. Gamma rays are penetrating, and the radiation energy level of positive and anti-matter annihilation is very high. If it is not well protected, the biological body will be killed by its own antimatter when it is used."

The collectors echoed the proposal, and everyone continued to carry out the radiation protection design in full swing.

To put it simply, it is to add heavy nuclear materials such as lead and bismuth, and then thicken and constantly superimpose - this is the only way to prevent non-electroic radiation, at least for now.

"In this case, it should be almost done."

The collectors observed the antimatter propulsion of this semi-finished product. They continue to modify it on the original basis. The front end of the antimatter container is closed, and the continuous head and tail phase are followed by the antimatter container, forming an antimatter container column. When the antimatter on the last side is exhausted, they will approach the antimatter container connected to it. It will be connected to each other, and the antimatter will continue to rush to the tail from the channel of connection and join the reaction of positive and anti-matter annihilation.

And surrounded by the horizontal antimatter container column, It is a layered gamma-ray protection layer constructed from heavy nuclear material, so that it can resist the annihilation of positive and negative materials and release high-energy gamma-ray radiation when accelerating.

The lifespan of the built-in neural network cell body is shortened by Huo Gu, which improves the division rate of cells, and simplifies the genes of these cells to avoid gene damage to the greatest extent.

It's just that this is not the end. Gamma rays are only one side, and there is another problem that needs to be solved.

"In this way, the problem of radiation penetration and the problem of heat dissipation need to be solved."

Although the gamma ray can be blocked by the protective layer of heavy nuclear material, it also means that the energy is trapped in the protective layer, so it needs to be cooled to take away the retained heat in the protective layer. Otherwise, it will not take long before the antimatter propulsion is started, and the whole propulsion part will be melted into a high temperature by the accumulated high temperature. Plasma.

In order to solve this problem, solid-state helium is also needed, and it is not difficult to make solid-state helium. Helium can be compressed into solid-state helium by using strong water pressure, and the temperature of solid-state helium is minus 272.2 degrees Celsius, which is quite close to absolute zero.

The low temperature of solid helium can't withstand any cells, so a special design of the scalar layer is designed, and then a channel is designed. When the antimatter is propulsion starts, the channel together with solid helium will be opened, and the gradual and slow low-temperature helium will be released, and the heat accumulated in the gamma-ray protective layer will be brought by the flow of body fluids. It is to the low-temperature helium, and then it is cooled down. After cooling is completed, it is introduced into the gamma-ray protective layer again.

After this whole cycle, the so-called cooling link has been completed.

Anti-matter propulsion can also announce the completion of the design. Later, it is only through the finished product experiment to verify whether the effect of anti-matter propulsion designed by Huogu is ideal and whether there are any factors that have not been considered.

"Will, do you need to make samples now?"

The collectors were excited to ask for Huo Gu's opinion, and They were eager to try.

Collectors have a certain understanding of anti-matter before mass manufacturing, which is due to the science fiction of the Selin people, which is the collectors have such a cognition.

But it is also these science fiction novels that make collectors subconsciously and subjectively think that 'antimatter' is something that belongs to scientific fantasy, and in reality, they just think about it.

However, now, they have been created, and not only have they been created, but they are also being initially applied. This sense of achievement is unparalleled and wonderful.

Try to imagine, take the curvature engine as an example. You rely on real knowledge, according to your understanding and ideas of knowledge, from theoretical basis to material application, from parts to component to build and assemble the curvature engine step by step.

When the finished product appears in front of you, you will suddenly realize how exaggerated you have done. The things in your fantasy will be dragged into reality by you. Your life, your future, and your civilization will be changed by this.

Just rely on your own hands!

Huo Gu could feel the excitement of the collectors, but he still rejected the collectors' proposal.

"No, let's design other antimatter applications before making samples together. Don't worry."

[What's next?]

"The upgrade of weapons."