My Items Have an Upgrade Panel

Chapter 131 - 131: Creating a Supercomputer and Adding Points to It



Chapter 131 - 131: Creating a Supercomputer and Adding Points to It

Chapter 131: Creating a Supercomputer and Adding Points to It

Translator: EndlessFantasy Translation Editor: EndlessFantasy Translation

Before he went to bed at night, Tang Rui had already successfully manufactured two laboratory multi-functional robots.

He made two of them because they were different models. Type A was a multi-legged and multi-armed robot, which was more suitable for manufacturing, while Type B was a tracked scanning robot used for transportation, lifting, and scanning.

With these two types of robots, the following laboratory modifications would be much more convenient.

“Celia, according to the blueprints, create ten A-type robots and five B-type robots.”

“Alright.”

Before leaving the laboratory, Tang Rui gave Celia an order. By the time he woke up the next day, these 15 robots would be almost finished. They took the elevator back to the villa.

When Tang Rui returned to the room, he found that Li Shuyao was not there. What was going on? Hadn’t she finished showering? That shouldn’t be the case.

Just as Tang Rui turned his head and was about to leave the room, Li Shuyao pushed open the door.

Damn!

At that moment, Li Shuyao walked in slowly with long blond hair and a white wedding dress.

“Are you my Master?” Li Shuyao looked at Tang Rui and asked with a smile.

Who could withstand this? That was not right; there was still one thing missing. Tang Rui quickly ran out of the room under Li Shuyao’s dumbfounded gaze. When he returned to his room, there was a red rope in his hand.

“This is what a god should do.”

After tying the rope to Li Shuyao’s wrist, he fused with the heroic spirit. At this moment, Tang Rui’s attributes were double A in strength and speed.

The next day, when Tang Rui woke up, Li Shuyao had already gone to work, and it was evident she had left in a hurry in the morning since she hadn’t cleaned the bedroom.

He stretched and felt a little uncomfortable on his back. In the next second, he pulled out a white lace rag from under the blanket. This was the wreckage of the wedding dress. Tang Rui curled his lips, casually threw it away, and got up to wash up.

After breakfast, he came to the laboratory to transform a Type A robot into a housework robot. “Celia, control this robot and clean the villa.”

“Alright.”

“Show me the holographic projection model of the supercomputer.”

“Alright.”

“Celia, control the B-type robot and move the supercomputer parts to the laboratory.”

“Alright.”

With the robots, Tang Rui only needed to open his mouth, and everything else, the robot would do it. He sat on the sofa and looked at the holographic projection of the supercomputer in front of him.

This supercomputer wasn’t the Sunway TaihuLight. Although the supercomputer was powerful, its system structure and construction structure were not suitable for artificial intelligence.

The supercomputer in front of him was the Pengcheng Al No. 2, the supercomputer that Celia’s mainframe currently resided in.

Compared to the Sunway, this supercomputer was far inferior, whether in terms of peak or average computing power. They were not on the same level. But the problem was…

This supercomputer was specially built for artificial intelligence. The system framework included a deep learning simulation algorithm specifically for artificial intelligence.

He didn’t care about computing power. In any case, he had to strengthen and level up. Instead of spending a lot of money on a supercomputer, it was better to build a suitable one and then strengthen it.

After a while, five B-type robots brought a bunch of parts back to the laboratory. There was nothing else to say; let’s do it.

In the morning, Tang Rui assembled a blade array the size of a wardrobe. Next, he had to assemble 199 blade arrays of this size before he could complete the mission. If he relied on himself, it would definitely not work.

However, there was a template, and he had done it himself. Next, he would let Celia control the Type A robot to work. Although he wasn’t sure if he could get origin points, he could give it a try. It didn’t matter if he didn’t.

In any case, the equipment he created and the equipment he created would have a system interface. It was just that there was no origin point.

“Celia, start production according to the blueprint and production process.”

“Alright.”

Fourteen A-type robots began to assemble the supercomputer. The remaining two Type A robots helped Tang Rui do other things. “Celia, cut the stainless steel plate according to the lines 1 drew.”

“Alright.”

Two robots grabbed the stainless steel plate, and the laser cutting equipment was ready to be activated at any time.

Tang Rui stood in front of the holographic projection, drawing lines on the stainless steel plate in front of him. As his fingers moved, lines appeared on the stainless steel plate.

Of course, this was not the final result. He still had to correct these lines. Otherwise, with the crooked lines he drew, the stainless steel plate he cut out could not be used.

After a while, after the line was corrected, Tang Rui clicked OK.

Bzz…

The laser cutting equipment on the mechanical arm was activated and began to cut according to the coordinates. In less than twenty seconds, the stainless steel plate was cut.

“Celia, bring the stainless steel plate over.”

“Alright.”

The robot brought the cut stainless steel plate in front of Tang Rui. This stainless steel plate was not used for anything else but to build a cabinet for the supercomputer.

Previously, he had already built a shelf, and the outer shell was not even made. Now, he had to patch up the outer shell.

“Celia, scan the cabinet’s outer shell and continue cutting the stainless steel plate to create the outer shell.”

“Alright.” The two Type A robots went to cut the stainless steel plates again. Tang Rui walked to the refrigerator beside him and took out a bottle of iced cola from inside.

Ton, ton, ton, ton…

“Awesome!” After drinking half a bottle of iced cola, Tang Rui burped comfortably. He looked at the dozens of robots working in the laboratory and felt very good. Only then did he feel something.

However, the laboratory had not been renovated yet. He had to build the supercomputer first, or else the computing power would not be enough.

At noon, Tang Rui went to the cafeteria to eat and check on the company’s situation while he was at it. Everyone was busy with their work.

The progress of the material experiment was very gratifying. The high-temperature resistant material had already been created, and its melting point had reached an astonishing 4.280 degrees.

They were currently researching the processing technology. Once the materials could be processed, he would have the materials for the body.

There was nothing much to do in the afternoon. Tang Rui decided to go back and catch up on sleep. He was a little tired yesterday.

In the next few days, he had been holed up in the laboratory, constantly planning the laboratory and getting Celia to generate 3D simulation renderings.

One day, when he was struggling with a design proposal, Celia informed him that the supercomputer cabinet had been completed. Tang Rui directly put down the design in his hand.

They arrived at the supercomputer room. 200 cabinets were placed side by side, all connected in series. The stainless steel shell that was not painted shone with a silver-white light. He arrived in front of the mainframe of the supercomputer control system. Tang Rui saw the system panel.

[Item: Supercomputer]

[Experience: 0/2000]

[Origin: 1957-45]

Looking at the number of origin points, he knew that this supercomputer did not give him any more of it. Otherwise, with the supercomputer’s size, he could at least add dozens or even hundreds of origin points.

Unfortunately, the loopholes in the system were not so easy to exploit.

He had only created a cabinet, and the system had already recognized him. But it didn’t matter. Tang Rui directly began to add points to the supercomputer..


Tip: You can use left, right, A and D keyboard keys to browse between chapters.